Inventory of mustard using non-contact level measurement
Application Note | Food & Beverage
- Continuous level monitoring, no risk of overfilling the vessel
- Correct amount of product supplied at the correct time
- Maintenance-free measuring devices
Inventory must be checked regularly to ensure that the finished product is continuously supplied to the filling area. The minimum or maximum levels of mustard in the tanks were previously detected using limit switches. Mustard production only started once the minimum limit had been reached which often resulted into shortages.
A mustard producer in France was looking for a suitable measurement solution for his new warehouse. This included the installation of several non-pressurized buffer tanks that were 4-5 m / 13-16 ft high. The task was to continuously measure the level of different varieties of mustard in these tanks. Continuous measurement would permit the operators to study usage trends and make sure that the finished product is ordered at the appropriate time and supplied in the correct amounts. The customer requested non-contact measurement.
KROHNE delivered several OPTIWAVE 7300 C FMCW radar level transmitters with DN 80 / 3" Drop antennas made of plain PP. One device was fitted on each tank roof. This contact-less, 2-wire transmitter continuously measures the level and thereby calculates the product that remains in each tank.
This solution allows measurement of the product level in the tank at any time, enabling the user to optimize supply inventory and reorder batches in a timely manner, without the risk of overfilling the tank. Measurements can also be taken during the filling process. No costly aiming kit is required to install these devices due to their compact design and exceptionally high signal dynamics – an advantage of using FMCW radar technology. Deposits on the antenna are prevented thanks to the ellipsoidal shape, smooth polypropylene surface and completely encapsulated design. This eliminates the need for purging systems or periodic cleaning. The level transmitters come pre-confi gured; at the time of their commissioning, only a few parameters such as tank height and blocking distance need to be programmed into the transmitter. The OPTIWAVE 7300 gives stable and reliable measurement results while being simple to set up and use.