Start-up & commissioning for metering systems

On-site support by dedicated KROHNE engineers

  • Onsite commissioning services for on- and offshore metering systems
  • Consultancy during the implementation of systems using KROHNE and non-KROHNE products
  • Assurance of smooth and continuous operations in the field
  • Site acceptance testing (SAT) to verify the system is working according to requirements

Start-up & commissioning for metering systems

On-site support by dedicated KROHNE engineers

  • Onsite commissioning services for on- and offshore metering systems
  • Consultancy during the implementation of systems using KROHNE and non-KROHNE products
  • Assurance of smooth and continuous operations in the field
  • Site acceptance testing (SAT) to verify the system is working according to requirements

Overview

The diagnostic capabilities of instrumentation and metering systems have significantly increased in recent years. Although KROHNE metering systems are designed to operate from the moment they are powered up, and settings can be altered through intuitive interfaces, it is not unusual to have a service engineer on site during start-up and commissioning. This engineer can combine start-up and commissioning with potential troubleshooting as well as service and operator training.

Our dedicated systems engineers have followed additional training programs for the integration of third-party instruments such as analysers, gas chromatographs, sampling systems, valves and PLCs. This allows a single engineer to conduct first and second tier on-site service on full metering systems. Where expert service is required on a non-KROHNE product, we will liaise directly with the manufacturer enabling all services to be conducted under our co-ordination and responsibility.

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

  • Kick-off meetings
  • Inspection of instrumentation and communication from the field to the control room
  • Support by experienced engineers with offshore certification where required
  • Expert service for the implementation of third-party instrumentation, fully co-ordinated by KROHNE
  • Cooperation and communication with local metrology institutes during commissioning
  • Training and workshops for engineers and maintenance staff

Related solutions

Custody transfer metering systems for crude oil and refined products

Metering solution for liquids

  • Straight tube Coriolis and ultrasonic flowmeters to minimise pressure drop
  • Systems with mobile or integrated master meters, uni- & bi-directional ball provers or small volume provers
  • Comprising flow metering skid, flow balancing, metering control cabinets, sampling and analyser systems, including all supervisory and validation software

Custody transfer metering systems for gases

Metering solution for gases

  • Possibility for two ultrasonic flowmeters with different path configurations mounted flange-to flange to avoid common mode errors
  • SUMMIT flow computer and SynEnergy supervisory software for gas measurement.
  • Comprising flow metering skid, metering control cabinets, sampling and analyser systems, and all supervisory and validation software

Custody transfer metering systems for LNG

Metering solution for liquefied natural gas

  • Based on ultrasonic or Coriolis cryogenic flow meters
  • From large scale ship (un)loading to bunkering and truck loading
  • Comprising flow metering skid, metering control cabinets, sampling and analyser systems, and all supervisory and validation software

Custody transfer metering systems for produced water

Metering solution for contaminated and treated water from oil wells

  • Pre-installed measurement skid with flowmeters and valves
  • Pre-calibrated to meet custody transfer regulations (e.g. OIML R49, MID MI-001)
  • Completely designed, engineered and manufactured according to customer specifications

Related services

Consultancy & engineering for metering systems

From metrology concepts through to design and testing

  • Consultancy regarding local and international metrology requirements and certifications
  • Cost effective engineering concepts tailored to application and installation
  • Detailed design of mechanical setup, instrumentation, E&I and software
  • Site survey and feasibility studies for specific process or technical requirements
  • Assistance during project execution

System calibration & validation for metering systems

Additional diagnostics and monitoring to achieve optimal performance of the system

  • KROHNE certified validation with full audit trail
  • On-site or laboratory calibration of instruments
  • Adjustments according to application requirements
  • Uncertainty calculations with all parties involved
  • Periodical inspection, including environmental and metrological certification

Operation & maintenance for metering systems

Support for on-going diagnosis and system health checks

  • Maintenance contracts and service level agreements
  • Pre-defined service rates and response times
  • 24/7 Customer support and emergency helpdesk
  • Periodic health checks and software updates
  • Troubleshooting using a remote link or by an engineer on-site

Training for metering systems

Full range of workshops and seminars related to products and measurement solutions

  • Basic principles of metering systems
  • Individual training sessions for operational, engineering and maintenance personnel
  • Customised project training and engineering background
Email
Contact