Integral orifice meter run assembly

DP flowmeter for process applications with small line sizes (down to DN15 / ½")

  • Standardised calibrated meter run assembly, designed acc. to ISO 5167 or ISO TR 15377
  • Up to +400°C / +752°F; max. 160 bar / 2320 psi (line pressure)
  • Flange: DN15…100 / ½...4"
  • 2-wire, 4…20 mA/HART®, FF, Profibus-PA

Integral orifice meter run assembly

DP flowmeter for process applications with small line sizes (down to DN15 / ½")

  • Standardised calibrated meter run assembly, designed acc. to ISO 5167 or ISO TR 15377
  • Up to +400°C / +752°F; max. 160 bar / 2320 psi (line pressure)
  • Flange: DN15…100 / ½...4"
  • 2-wire, 4…20 mA/HART®, FF, Profibus-PA

Overview

The integral orifice meter run assembly is a differential pressure flowmeter especially designed for smaller line sizes where the surface roughness, weld seams and other geometrical imperfections have a relatively big influence on the measurement uncertainty. The DP flowmeter therefore features a minimum length of upstream and downstream pipe, reducing additional uncertainties of the installation to a minimum. It is suitable for process and allocation measurement of gases and liquids including viscous fluids, fluids with suspended solids or fluids with gas entrainment. KROHNE offers the complete orifice assembly with orifice meter run, DP transmitter, valves, accessories, engineering, and documentation. The DP flowmeter comes pressure tested and ready for commissioning.

Product features and options depend on device configuration: Contact us to make sure that your preferred functionality can be combined in one device.

  • Standardised calibrated orifice assembly for high accuracy requirements
  • Design acc. to ISO 5167 or ISO TR 15377 from DN15 / ½″ up to DN100 / 4”, other sizes and designs on request
  • Elimination of additional uncertainties due to installation effects
  • Low TCO (Total Cost of Ownership) due to reduced engineering, commissioning and installation costs
  • Reduced need for recalibration in the field through advanced 3-D linearised OPTIBAR DP transmitters
  • Complete flowmeter solution with orifice meter run, manifold, DP transmitter, sizing and documentation from a single source
  • Redundancy available (1oo2, 2oo3)
  • HART®7, Foundation fieldbus and Profibus-PA communication options
  • SIL 2/3 certified versions
  • Ex ia, Ex d approvals
Related products
OPTICHECK Pressure Mobile
Mobile app for pressure transmitters
  • Works with all OPTIBAR PM 5060, OPTIBAR PC 5060 and OPTIBAR DP 7060 equipped with Bluetooth display and adjustment module
  • Wireless device commissioning, verification and monitoring even in hard-to-reach areas
  • Parameterisation similar to PACTware DTM including remote SIL mode activation
  • Free download for iOS and Android
OPTIBAR FC 1000
Flow computer for process control of liquids, gases and steam
  • High performance flow and energy calculation with DP flow elements, volumetric or mass flowmeters
  • Compact design, quick and easy-to-operate via TFT touch screen
  • Enables split-range operation with two pressure transmitters for increased measuring dynamics
  • HART® communication with all common DP transmitters for loss-free measured data transmission and possibility of automatic zero point adjustment
OPTIBAR DP 3050
Differential pressure transmitter for general flow, level and differential pressure applications
  • The most compact design in its class
  • Measuring ranges: 100 mbar…16 bar / 1.45…232 psi; Line pressure: up to 160 bar / 2320 psi
  • Reference accuracy ± 0.1%
  • 2-wire, 4…20 mA/HART®7
OPTIBAR DP 7060
Differential pressure transmitter for flow, level, differential pressure, density and interface measurements
  • High performance DP transmitter with integrated line pressure measurement
  • Measuring range: 30 mbar…16bar / 0.44…232 psi; Line pressure: up to 700 bar / 10,153 psi
  • Reference accuracy of ±0.065%
  • 2-wire, 4…20 mA/HART®, FF, Profibus-PA, Bluetooth®
OPTIBAR OP 1100
Orifice plate with RF sealing face
  • For mounting between measuring flanges (ASME 16.36, 16.5, 16.47 A)
  • Size: ½…24"; up to ASME Cl 2500
  • Temperature: up to +450°C / +842°F
  • Material: 1.4404 / 316L
OPTIBAR OP 1110
Orifice plate with RTJ sealing face
  • For mounting between measuring flanges (ASME 16.36, 16.5)
  • Size: 1…24"; up to ASME Cl 2500
  • Temperature: up to +450°C / +842°F
  • Material: 1.4404 / 316L
OPTIBAR OP 3100
Orifice plate with flat sealing face and corner taps
  • Separate type, with carrier ring and optional shut-off valve
  • Size: DN50…600; up to PN100
  • Temperature: up to +400°C / +752°F
  • Material: 1.4404 / 316L
OPTIBAR OP 3200
Orifice plate with flat sealing face and corner taps
  • Compact type, with carrier ring, flange plate and optional manifold
  • Size: DN50…600; up to PN100
  • Temperature: up to +400°C / +752°F
  • Material: 1.4404 / 316L
OPTIBAR OP 4100
Orifice plate with annular chamber and corner taps
  • Separate type, for installation between standard flanges (EN 1092-1), optional shut-off valves
  • Size: DN50…600; up to PN100
  • Temperature: up to +400°C / +752°F
  • Material: 1.4404 / 316L
OPTIBAR OP 5100
Orifice assembly with measuring flanges (ASME 16.36)
  • With RF sealing face and flange taps
  • Size: 1…24"; up to ASME Cl 2500
  • Temperature: up to +400°C / +752°F
  • Material: 1.4404 / 316L
OPTIBAR OP 5110
Orifice assembly with measuring flanges (ASME 16.36)
  • With RTJ sealing face and flange taps
  • Size: 1…24"; up to ASME Cl 2500
  • Temperature: up to +400°C / +752°F
  • Material: 1.4404 / 316L
OPTIBAR MR 4300
Orifice meter run with corner taps and annular chambers
  • Completely pre-assembled with orifice plate, piping, inlet/outlet sections, process connections
  • Size: DN15…100 / ½…4"; up to PN100 / ASME Cl 1500
  • Temperature: max. +400°C / +752°F
  • Material: 1.4404 / 316L
Email
Contact